Purasan can now be used with most marine toilets
Onboard sewage treatment device for fresh and brackish waters. Neutralizes waste, making it sanitary and safe for boaters and marine life
Benefits
- US Coast Guard-approved Type I Marine Sanitation Device for vessels up to 65 feet in length – can be used with most marine toilets
- Treats waste in fresh and brackish water applications
- Electronically controlled, two-minute treatment cycle
- Toilet and treatment cycle can be activated with one button
- A single tablet cartridge can be used for many treatment cycles
- One Purasan can be installed with two toilets
- Low power consumption
- Neutralizes bacteria in wastewater
- Easy to change tablet dispenser
- Quiet operation
- Easy to clean and maintain
- Alleviates need for holding tanks
- Each unit is assembled by hand, individually tested and backed by Raritan’s one-year limited warranty and legendary technical support team
Options
- Available in 12, 24, 32V DC
Approximate shipping weight: 22 lbs. (10 kg)
Basic requirements for the Purasan’s installation involve both treatment tank and tablet dispenser assemblies. The treatment tank must be located with 6 feet (1.8 m) of the toilet, with the discharge of the tank below the level of the discharge of the toilet. Installation must be on a level surface, an a vented loop is required. The tablet dispenser assembly must be located 15 inches (37.5 cm) above the treatment tank.
The push button switch on the Purasan’s control panel can be wired to for single button operations that will flush the toilet and activate the treatment cycle.
Developed at the request of Crown Head owners, the Purasan is ideal for use with any of Raritan’s macerating toilets in fresh water applications. A single tablet cartridge is placed in the tablet dispenser and lasts for several hundred treatment cycles.
Maceration and chlorination of waste is the most effective known method of treatment and eliminates the need for holding tanks.
Sample installation with raw water intake toilet
Sample installation with onboard pressurizer
Model Options
Purasan is available in 12, 24, or 32V DC. The PST*02 models are for use with raw water intake toilets and PST*03 is for use with pressurized freshwater or dual toilet installations. Specify voltage when ordering (e.g. PST2402 for 24V).
Check out the PDF for more details.